2018 EBY Ruff Neck 35'x8'x7'6" Double Deck Livestock Trailer

-LENGTH: 35'

-WIDTH: 8'

-INSIDE HEIGHT: 7'6"

-COUPLER: 2-5/16" BALL

-GVW PACKAGE

(3) 8K AXLES

(6) 17.5 STEEL WHEELS

235/75R17.5 TIRES

GVWR: 25,000 LBS

-SPARE WHEEL AND TIRE: YES

-BRAKES: ELEC/HYD

-----FLOOR-----

-FLOOR: .115 FLAT, 10' CROSSMEMBER SPACING

-----ROOF-----

-ROOF: KEMLITE

-----FRONT END-----

-FRONT END: TAPERED

--MATERIAL: ALUM

--FULLY VENTED FRONT END BELOW LIGHTED SIGN

-LIGHTED SIGN: ALUM BOX

--NAME: WICKMAN

--COLOR: BLACK, BLOCK

--ADD TOGGLE SWITCH TO TURN ON/OFF; WIRE THE SIGN

SO THAT POWER IS OFF TO THE SIGN WHEN THE TRUCK

IS TURNED OFF

-NOSE FLOOR: DIAMOND PLATE

-----DROP SHEET-----

-LANDING GEAR: SL/DS

-----REAR END-----

-BACKEND: FULL SWING W/SLIDER

--(LOWER HEADER TO MAKE SAME AS 7' REAR DOOR)

-----SIDES-----

-PRE PAINTED WHITE ALUM SIDES

-SIDE PATTERN: PPD

-SIDE DOOR TYPE: STD 28-1/2"

--LOCATION: CURBSIDE FRONT

--ADD SIDE DOOR CURBSIDE REAR, (LARGE ARM HOLE)

--DOOR OPTIONS: SPLIT FOR DECK, FRONT DOOR

ONLY

-----DECK RAIL------

-DECK RAIL: YES

--LENGTH: 24'

--HEIGHT: CENTERED, CUT AT SIDE DOOR

-DECK STORAGE: YES, USE 3" SPRING LATCHES

-DECKING: BOARDS TO BE REGULAR LIGHT WEIGHT

DECKING

--SIDE HEDGED RAMP AT END OF DECK (SEE NOTE #1)

--FUNNEL GATE TO CONNECT BACKEND TO SIDE HEDGE RAMP

CHUTE (SEE NOTE#2)

-----PARTITIONS-----

-NOSE GATE: FULL WIDTH DROP GATE W/ROUND

VENT PATTERN

--USE SPRING PIN LATCHES AS HOLD BACKS

--USE (4) HINGES ON BOTTOM OF GATE

-WHEEL POCKET GATE: FULL WIDTH GATE SPLIT

W/HINGED PASS THRU TOP (SEE NOTE#3)

--NOTE: MAKE UPPER GATE AS TALL AS POSSIBLE

--LOCATION: 11' FROM REAR, TUBE STYLE

-BELLY GATE: FULL SWING GATE

--LOCATION: 11' FROM DROP, TUBE STYLE

--GATE OPTIONS: SPLIT FOR DECKING

-NOTE: OLD STYLE SWINGING HOLD BACKS AS SHORT AS

POSSIBLE TO HOLD GATE VS SIDE OF TRAILER

-----LIGHTS-----

-EXTERIOR CLEARANCE LIGHT PACKAGE: LIGHT PKG.

--NOTE: 2" ROUND GROMMET MOUNT---Trucklite---

(MODEL 30 HIGH PROFILE P.C.)

--USE FLAT LIGHTS ON BOTTOM RAIL AT REAR OF

TRAILER ( FLUSH MOUNT 2" TRUCKLITE MODEL 30)

-REAR TAIL LIGHT PACKAGE: ADD S/T/T

-BACK UP LIGHTS: YES

-INTERIOR DOME LIGHTS: (1) DOME LIGHT PER

COMPARTMENT

----ACCESSORIES----

-BELLY VENTS: (4) SLIDING

-CLOSURE RETAINER CLIPS: YES

--ADD RIVET CLIPS TO RAIL

-CLOSURE TYPE: COROPLAST

--COLOR: GRAY

-CLOSURE STORAGE: YES

-ROOF VENTS: (6) POP-UP

----NOTES----

-NOTE #1: FOLD TO WALL RAMP AT REAR

-NOTE #2: FUNNEL GATE AT REAR W/DROP PIN

--ADD D-RING WITH CHAIN AND PIN TOWARDS CS FOR

HOLD BACK --DO NOT USE SPRING PIN LATCH

-NOTE #3: BOGIE GATE NOTES:

-STOP AND PIN ON SWING GATE OF UPPER GATE

IN ADDITION TO CURRENT SLAM---PLACE PIN RECEIVER

ON REAR OF POST FOR EASY ACCESS

-OLD STYLE SWINGING HOOK HOLD BACKS

--MAKE AS SHORT AS POSSIBLE TO HOLD GATES AS CLOSE

AS POSSIBLE TO SIDE OF TRAILER

-REDESIGN HORIZONTAL SPRING LATCH ON BOTTOM

OF UPPER GATE (INSTALL D RING)

-INSTALL 2X3 ANGLE TO PERM SHEET AT POST TO

ATTACH POST TO WALL

-NOTE #4: BOLT ON REAR HEADER COVER FOR ACCESS

TO LIGHTS